Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Encoder IM174

Created by: Dave B. at: 4/8/2009 11:32 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/8/2009 11:32 AM	Rate (0)
Dave B. Advanced Member Joined: 2/11/2009 Last visit: 7/14/2025 Posts: 34 Rating: (0)	hi Can I use a 24V line driver encoder on the IM174 connectors X2 to X6 ? It seemsI can only use 5V TTL level onthat connectors. thanks in advance for any help. Dave

Suggestion To thank Quote Answer

4/14/2009 12:31 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating: (3073)	Hello, look at the manual of the IM174: http://support.automation.siemens.com/WW/view/en/35014863 There are 24 VDC supply voltage pins on the IM174. Regards Christoph

Suggestion To thank Quote Answer

4/14/2009 1:36 PM	Rate (0)
Dave B. Advanced Member Joined: 2/11/2009 Last visit: 7/14/2025 Posts: 34 Rating: (0)	Thanks Christoph, I mean if even the signal A-B and Z are 24Vdc ... I'm quite sure the level of signal has to be 5Vdc while the power supply can be 5V or 24V either way . Dave
	Last edited by: Dave B. at: 4/14/2009 1:37 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on