Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Automatic restart

Created by: Eastern at: 4/14/2009 3:29 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/14/2009 3:29 PM	Rate (0)
Eastern Posts: 557 Rating: (64)	hi I am using s7 400 414-4h system.in this system whenever we disconnect fibre optical link from sync module that time one cpu will run & another one is stop & run blinking.now when i again reconnect, i want automatic restart from running cpu to another cpu....if it is possible please tell me the way......... regards
Eastern Posts: 557 Rating: (64)
Suggestion To thank Quote Answer

4/14/2009 5:05 PM	Rate (0)
Aret Posts: 2348 Rating: (265)	So you emulate SYNC error. Do you want to achieve automatic swithchover to another CPU in this case?
Aret Posts: 2348 Rating: (265)
Suggestion To thank Quote Answer

4/15/2009 6:35 AM	Rate (0)
Eastern Posts: 557 Rating: (64)	HI Aret, No when we disconnect & reconnect the fibre optical link from sync module,that time one cpu is in run mode & another cpu is required manual warm restart, that restart i would like to give automaticlly from the master cpu to another cpu...... regards
Eastern Posts: 557 Rating: (64)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on