Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Getting day & month out of DATE

Created by: maartend at: 4/15/2009 1:23 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/15/2009 1:23 PM	Rate (0)
maartend Posts: 5 Rating: (0)	Hi, Every day at 00:00 0B10 is called If have already my Date. When we are the first of the month (day of the month = 1)... then... When we are the first of the year....(day of the month = 1 and month = 1)then... How can I compare those thing? Can anyone help me please? Thanks in advance
maartend Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/15/2009 5:09 PM	Rate (0)
Denilson Pegaia Diamond Member Joined: 9/23/2005 Last visit: 1/16/2026 Posts: 4449 Rating: (1487)	Hi, read the date/time of the CPU with SFC1. The second byte of the date and time data type corresponds to the Monthand the3rdbyte corresponds to the day(both in BCD format).
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/15/2009 5:36 PM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Hello maartend, Just to confirm Pegaia' words, and I hope for you'll be easier to understand it, look at How can you read out the date and time with SFC1 (READ_CLK) and input them with SFC0 (SET_CLK)? Hope this will helps. Best regards Hristo MIhalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on