Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Date and time not working

Created by: Avatar_tr at: 6/18/2022 6:23 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/18/2022 6:23 PM	Rate (0)
Avatar_tr Posts: 63 Rating: (0)	Hello guys, I want to use the project in the link. (https://support.industry.siemens.com/cs/ww/en/view/21222026). The time and date reading part of the project works, so I can see the values, but when I want to change the time, it does not respond. I am sharing my project below, can you help me please? Good work. Attachment Date_tim_071846.zip (472 Downloads)
Avatar_tr Posts: 63 Rating: (0)	Last edited by: Jen_Moderator at: 06/20/2022 11:22:50 Link optimized.
Suggestion To thank Quote Answer

6/20/2022 11:58 AM	Rate (0)
mopS04 Posts: 5521 Rating: (1058)	hi Avatar_tr, what RET_VAL do you get? The only error that may happen is, that there is an error in the Date and Time structure. Therefore the SFC0 give you back 8080 for error in date-format or 8081 for error in time-format. There is also an example for this SFC that you can find in the S7-help. Place your cursor in the "SET_CLK" and press F1 and you will find it. hope this helps, regards,
mopS04 Posts: 5521 Rating: (1058)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on