Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

integer to time value not an s5timer format conversion

Created by: ivan_euler at: 4/25/2009 2:13 AM (3 Replies)

Rating (1)

Thanks 2

4 Entries

4/25/2009 2:13 AM	Rate (0)
ivan_euler Posts: 54 Rating: (0)	hello any help in converting an integer value to a timer value..its easy to convert integer to s5Timer value but in trying to convert it in time value its tricky 1 = T # 1ms
ivan_euler Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

4/25/2009 2:54 AM	Rate (1)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 1/14/2026 Posts: 12480 Rating: (2722)	ivan_euler hello any help in converting an integer value to a timer value..its easy to convert integer to s5Timer value but in trying to convert it in time value its tricky 1 = T # 1ms Hello Ivan; Not really, if you mean converting an integer to a TIME (T#__) value for an IEC timer [SFB4, SFB5...] Here is the definition of the TIME datatype (courtesy of the Step 7 online help): TIME (IEC Tme: T# ) 32 bit (DINT) IEC time in steps of 1 ms, Integer signed so if you move the integer 1 to a Time-formatted register (in a DB, for example) it will be automatically interpreted as 1ms. Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Dnyanesh

4/25/2009 5:38 AM	Rate (0)
ivan_euler Posts: 54 Rating: (0)	thanks a lot...... yeah your right ......really appreciate your help .....it was my mistake assuming that it was a 16 bit integer not a 32 bit
ivan_euler Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

4/26/2009 1:08 AM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 12/22/2025 Posts: 703 Rating: (98)	Hello, probably you've twist the formats in your mind , conversion to TIME is such easy but to S5Time it's little bit more difficult... Regards Sydney

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Dnyanesh

|

Share this page:

Share this page on...

Follow us on