Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

UNABLE TO OPEN PROJECT??..

Created by: kanan at: 4/16/2008 6:36 AM (16 Replies)

Rating (3)

Thanks 0

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

4/22/2008 12:29 AM	Rate (1)
Phantom75 Posts: 2661 Rating: (279)	kanan: I looked at your project and the folder access settings are ok. The problem is, some file is missing or corrupt. That's why you are not able to open the project. How important are the projects? Perhaps you should seek helpfrom tech support. Sorry
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

4/22/2008 6:10 AM	Rate (0)
kanan Posts: 133 Rating: (2)	thank you for helping. it was good project for learning... any way thank you all for support! regards
kanan Posts: 133 Rating: (2)
Suggestion To thank Quote Answer

4/28/2008 6:11 PM	Rate (2)
Dec Gold Expert Joined: 5/19/2006 Last visit: 1/11/2026 Posts: 550 Rating: (107)	Hey, See attached at least the main S7Program Blocks and symbols. I don't have too much time to repairall the project but at least you have the main program back. Hope this helps. Dec Attachment St8500_t.zip (840 Downloads)

Suggestion To thank Quote Answer

4/29/2008 6:05 AM	Rate (0)
kanan Posts: 133 Rating: (2)	Hi Dec! Very thanks! I am able to open project! of couse i cant open hardware config. but this is not so important. How did you do that(of couse if its not secret) thank you again! regards
kanan Posts: 133 Rating: (2)
Suggestion To thank Quote Answer

9/28/2022 10:54 AM	Rate (0)
ac48154 Posts: 1 Rating: (0)	Dec Hey, See attached at least the main S7Program Blocks and symbols. I don't have too much time to repairall the project but at least you have the main program back. Hope this helps. Dec Hi, Can you share with the rest of the community how did you do this back in the days?
ac48154 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/29/2022 4:14 AM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 1/14/2026 Posts: 4848 Rating: (512)	ac48154 Dec Hey, See attached at least the main S7Program Blocks and symbols. I don't have too much time to repairall the project but at least you have the main program back. Hope this helps. Dec Hi, Can you share with the rest of the community how did you do this back in the days? Kanan is not part of the community anymore. If he got it sorted from the suggestinons in this thread, then you should have the same info available.

Suggestion To thank Quote Answer

10/29/2022 7:28 AM	Rate (0)
raj101111 Posts: 1 Rating: (0)	Dec Hey, See attached at least the main S7Program Blocks and symbols. I don't have too much time to repairall the project but at least you have the main program back. Hope this helps. Dec Hey Dec could you please share how did you retrieve the project ?
raj101111 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on