Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

issue to find out the input via cross reference and in program

Created by: Ehsan0550 at: 11/12/2022 10:31 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/12/2022 10:31 PM	Rate (0)
Ehsan0550 Posts: 8 Rating: (0)	Hello actually I am dealing with a flowmeter used as pulse input mode and the mass flow is calculated using the pulse received from Flowmeter. The input which connected to PLC is I124.0 and the pulse is physically checked. But, regarding attached pic, the baffling part for me is, I can not find the input in cross reference to trace the program. Is it used by pointer or any other type of function which made it invisible in cross reference? Attachment cross refrence_i_o_access.png (642 Downloads)
Ehsan0550 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

11/14/2022 8:25 AM	Rate (0)
SCOTT123 Silver Member Joined: 10/16/2007 Last visit: 12/11/2025 Posts: 658 Rating: (46)	Hello, maybe the double word 120 is used or the word 123, 124. Check these addresses too. Scott

Suggestion To thank Quote Answer

11/14/2022 1:41 PM	Rate (0)
SCOTT123 Silver Member Joined: 10/16/2007 Last visit: 12/11/2025 Posts: 658 Rating: (46)	Hello, see the following picture. It is German but you may understand. Scott

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on