Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

CPU 317-2 DP upload station to PG error

Created by: Rkar at: 11/20/2022 2:57 AM (2 Replies)

Rating (0)

Thanks 2

3 Entries

11/20/2022 2:57 AM	Rate (0)
Rkar Posts: 2 Rating: (0)	Dear All, I am very new to Siemens forum and using Siemens Step 7 Simatic managerV5.7. I tried to backup the S7-300 CPU 317 2-DP but this error came out. Although it comes with the error and when I proceed to continue " Yes", I still can see the program inside. Error as below. (2000) Error while uploading the configuration to the programming device(PG).Do you want to continue? Anything can be missed during my backup? And how can I solve this? FYI.CPU 317 2-DP is linked to other CPU(Simotion C230-2) through Profibus. 1) Above is question 1. [snip] Please find attachments for more info. Attachment 317-2 DP backup error.jpeg (700 Downloads)
Rkar Posts: 2 Rating: (0)	Last edited by: Jen_Moderator at: 11/21/2022 10:38:36 Division of questions into separate topics.
Suggestion To thank Quote Answer

11/21/2022 8:50 AM	Rate (0)
Hazard_7 Bronze Member Joined: 5/30/2022 Last visit: 1/7/2026 Posts: 634 Rating: (103)	Hi Rkar, Check this forum thread, I think it might help you: Error when uploading S7 400
	If this information really helps, you could use the Rate function. Best Regards.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Rkar

11/21/2022 10:39 AM	Rate (0)
Jen_Moderator Posts: 8171 Rating: (174)	New question published by Rkar is split to a separate thread with the subject Backup Simotion C230-2 CPU. Best regards Jen_Moderator
Jen_Moderator Posts: 8171 Rating: (174)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Rkar

|

Share this page:

Share this page on...

Follow us on