Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

MC_POWE off in SIMATIC DRIVE S210

Created by: AutoGen_4408634 at: 4/13/2023 7:10 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/13/2023 7:10 AM	Rate (0)
AutoGen_4408634 Posts: 2 Rating: (0)	Hello Everyone, I have no previous experience with PLC that much, recently I am working with two drives S210 and performed the required task, but I have successfully made a function block for turning ON power in drives using a push button, but when I try to do same with the turning off power for drivers at that time power break from the circuit in programming and also turn off light at the actual machine but I did not hear any sound of turned off of drive which I heard at a time on turn ON of Drive. Here I also attached a pic of my programming for better understanding. Please share your opinions and share your knowledge with me. Thank you in advance Attachment Screenshot (3).png (362 Downloads)
AutoGen_4408634 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/13/2023 7:30 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 1/20/2026 Posts: 6051 Rating: (828)	Hello please set EN True and Enable Axis On/Off connect with enable Input-parameter MC_Power
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

4/13/2023 9:24 AM	Rate (0)
AutoGen_4408634 Posts: 2 Rating: (0)	I have facing same issue again. can you provide me more information regarding this. Vielen Dank im Voraus
AutoGen_4408634 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on