Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Marker Byte

Created by: Sindhu at: 6/10/2009 1:22 PM (3 Replies)

Rating (0)

Thanks 2

4 Entries

6/10/2009 1:22 PM	Rate (0)
Sindhu Posts: 163 Rating: (0)	Hello All! Can anybody tell me what is meant by Marker byte? Attachment marker byte.zip (541 Downloads)
Sindhu Posts: 163 Rating: (0)	Last edited by: Sindhu@KEAS-CBE at: 6/10/2009 1:23 PM
Suggestion To thank Quote Answer

6/10/2009 1:34 PM	Rate (0)
daga Gold Member Joined: 3/18/2009 Last visit: 12/9/2025 Posts: 306 Rating: (95)	In this case, the clock memory in CPU properties. Enable it and change it to 10 from 0. Attachment clockmarker.JPG (742 Downloads)

Suggestion To thank Quote Answer

6/10/2009 1:39 PM	Rate (0)
Niranjan Prasad Posts: 691 Rating: (37)	It means configure mb10 as clock memory
Niranjan Prasad Posts: 691 Rating: (37)
Suggestion To thank Quote Answer

6/10/2009 2:10 PM	Rate (0)
Eastern Posts: 557 Rating: (64)	HI Clock memories are memory bits which periodically change their binary values (pulse-pause ratio: 1:1). · Activate the check box if you want to use clock memory and enter the number of the memory byte. Note: The selected memory byte cannot be used for temporary data storage. A period duration/frequency is assigned to each bit of the clock memory byte: Bit 7 6 5 4 3 2 1 0 Period duration (s): 2 1.6 1 0.8 0.5 0.4 0.2 0.1 Frequency (Hz): 0.5 0.625 1 1.25 2 2.5 5 10 REGARDS
Eastern Posts: 557 Rating: (64)	Last edited by: Eastern at: 6/10/2009 2:12 PM
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users mugurelgi5 Elewout

|

Share this page:

Share this page on...

Follow us on