Default Header
(header konnte nicht geladen werden)
Navigation
TIA 18: set pg/pc interface is not found in windows control panel
Created by: AutoGen_345632 at: 2/20/2023 5:53 AM (3 Replies)
Rating 
Thanks 1
4 Entries
| 2/20/2023 5:53 AM | |
Joined: 11/19/2013 Last visit: 9/11/2024 Posts: 1 Rating:
|
Hello I am having a similar problem I installed TIA 18 pro on a new PC running windows 11 The set pg/pc interface is not found in windows control panel but can be found under "all apps" Siemens automation When I open it the only interface to be found is a picture of a network card with <none> next to it How do I add an interface? ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 02/20/2023 08:04:39New subject after splitting |
|
| 2/20/2023 6:41 AM | |
Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating:
|
try it download PC_Identifier from here https://support.industry.siemens.com/cs/ww/en/view/109812676 install it reboot and check if now working |
This contribution was helpful to
|
|
| 11/16/2023 4:19 PM | |
|
Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating:
|
see post above |
Follow us on