Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

PG/PC Drivers and interfaces are missing .

Created by: eng.mrezk at: 11/21/2023 6:32 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/21/2023 6:32 AM	Rate (0)
eng.mrezk Posts: 3 Rating: (0)	Hi All, i'm using TIA V15/15.1/17 and simatic manager v5.7 long time ago , but i'm facing an issues with the network adaptors and interfaces in the PG/PC as shown in the photo attached, i have checked on previous posts and found the S7DOS Help Service is not running and it's giving an error when starting it. any suggestions what can i do or else i re-install all of software's again ? Thanks Attachment PG_PC Issue.JPG (251 Downloads)
eng.mrezk Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 7:55 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 12/17/2025 Posts: 4493 Rating: (644)	Hi, perhaps this FAQ helps you: How do you parameterize the PG/PC interface and how do you ensure that the device driver is visible and can be selected? Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

11/21/2023 11:15 AM	Rate (0)
sancruz Gold Expert Joined: 3/11/2019 Last visit: 12/9/2025 Posts: 1653 Rating: (322)	Hi, in addition to the FAQ is worth to check if there are updates for TIA/SIMATIC Manager available. Sometimes the updates come also with newer versions of communication drivers. regards sancruz
	Feedback appreciated, please rate
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on