Navigation

Reaching IO link port input data

Created by: amperautomation at: 11/23/2023 2:51 PM (1 Replies)

11/23/2023 2:51 PM	Rate (0)
amperautomation Joined: 10/30/2022 Last visit: 9/20/2025 Posts: 8 Rating: (0)	Hello, is it possible to reach IO link master port input data using only IO link master HW identifier (268) or is it only possible by using HW for each port separetly with GETIO for example. Thanks in advance. Attachment ex.jpg (238 Downloads)

Suggestion To thank Quote Answer

11/27/2023 11:37 AM	Rate (0)
sancruz Gold Expert Joined: 3/11/2019 Last visit: 12/9/2025 Posts: 1653 Rating: (322)	Library for IO-Link (LIOLink) With the "LIOLink_Device" block you can use the hardware identifier of the IO-Link master or of the first submodule. Maybe this helps. regards sancruz
	Feedback appreciated, please rate
Suggestion To thank Quote Answer