Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Install TIA Step 7 on D: Drive`?

Created by: jthyge1 at: 11/27/2023 7:08 PM (3 Replies)

Rating (0)

Thanks 4

4 Entries

11/27/2023 7:08 PM	Rate (0)
jthyge1 Advanced Member Joined: 2/28/2008 Last visit: 9/22/2025 Posts: 325 Rating: (6)	Hi Is it not possible to install TIA on D: Drive? When installing, i only get the option for C:

Suggestion To thank Quote Answer

11/27/2023 7:26 PM	Rate (0)
Stefan Arcularius Platinum Expert Joined: 1/21/2013 Last visit: 12/29/2025 Posts: 4367 Rating: (650)	Hi jthyge1, Normally, you can choose the drive where you want to install TIA Portal, but once a TIA product is installed, the installation path cannot be changed (see the manual). However, telling us more about your problem may give us some other ideas or solutions. Kind regards Stefan

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Towome

11/27/2023 7:32 PM	Rate (0)
jthyge1 Advanced Member Joined: 2/28/2008 Last visit: 9/22/2025 Posts: 325 Rating: (6)	Hi Stefan I have a VPC where the VPS cluster administrator the C: Drive to be only for the operative system, Windows. So i would like to uninstalle alle TIA software from C: and reinstall on D:. But when i install, i am not able to choose D: drive.

Suggestion To thank Quote Answer

11/27/2023 8:32 PM	Rate (0)
jthyge1 Advanced Member Joined: 2/28/2008 Last visit: 9/22/2025 Posts: 325 Rating: (6)	I was able to choose D: drive. After uninstalling ALL siemens software on C:, then i could choose D: in the installation.

Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Towome Stefan Arcularius Jen_Moderator

|

Share this page:

Share this page on...

Follow us on