Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Error while I am trying to upload a S7-1200 program

Created by: Raheel_Ahmed at: 12/5/2023 6:07 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/5/2023 6:07 PM	Rate (0)
Raheel_Ahmed Joined: 12/5/2023 Last visit: 4/10/2025 Posts: 1 Rating: (0)	I am facing this problem while I am trying to upload a S7-1200 program. Screenshot is attached for your reference ------------------------------------------------------------------------------------------ Split from "loading will not be performed because preconditions are not met". Attachment Screenshot 2023-12-05 130124.png (295 Downloads)
	Last edited by: The Helping Hand at: 12/06/2023 12:27:06 New subject after splitting
Suggestion To thank Quote Answer

12/5/2023 10:35 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 12/23/2025 Posts: 16325 Rating: (2520)	Looks like you need Startdrive S120 V14, and G120... V15.1 installed on your PG/PC, just like the message states (albeit very cryptically). AutoGen_8493713 I am facing this problem while I am trying to upload a S7-1200 program. Screenshot is attached for your reference
	science guy
Suggestion To thank Quote Answer

12/6/2023 12:41 PM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 12/17/2025 Posts: 4493 Rating: (644)	Hi, I am not really sure which Version of Startdrive or TIA you need for the upload - please check Version of TIA Portal if you go online (Online & Diagnostic). If Version is V15.1 it´s clear. Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on