Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

VitoGate not communicating with Desgo CC

Created by: Scott Tonkonow at: 12/15/2023 3:38 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/15/2023 3:38 PM	Rate (0)
Scott Tonkonow Joined: 12/14/2023 Last visit: 9/10/2025 Posts: 2 Rating: (0)	I am able to discover my Viessmann Vitogate through Desgio but it will not import the Bacnet points/ objects to Local I/O. I have asked the IT people of my site to verify port 47808 UDP in/out is open and allowing traffic and they tell me its open. Any further advice would be appreciated.

Suggestion To thank

12/18/2023 9:47 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8171 Rating: (174)	Closed cause question posted twice. The second thread with the subject VitoGate not communicating with Desigo CC is published within the conference Desigo™ Building Automation System. Best regards, Jen_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on