Connection point - Unsupported device configuration

Good morning,
I want to use a reference connection point  : 6AV2 125-2AE13-0AX0 version 5.2 with a PLC 1517F-3PN on TIA Portal V17.
But when I load my program into the PLC, the diagnostic tell me that the device is not supported. Can you confirm that version 5.2 of my connection point is compatible with version 17 of TIA Portal?

My Mobile panel communicates with the PLC but the emergency stop does not work.​

Thank you.​

Closed cause question posted twice.

The second thread with the subject Connection point - not supported is published within the conference STEP 7 (TIA Portal).