Default Header
(header konnte nicht geladen werden)
Navigation
Rating 
Thanks 0
4 Entries
| 1/21/2024 2:45 PM | |
Joined: 7/23/2018 Last visit: 8/21/2025 Posts: 2 Rating:
|
Selam arkadaşlar Tia Portal Step7 Professional v15.1ve Wincc Professional v15.1 kurulumunda aşağıda ekteki hatayı alıyorum,yönergelere göre mevcuttaki Wincc prof'ları kaldırdım,tekrar kuruluma başladım fakat sonuç yine aynı. Çözümü hakkında yardımlarınızı rica ederim. Selamlar Hello friends, I am getting the error attached below in the Tia Portal Step7 Professional v15.1 and Wincc Professional v15.1 installation. I removed the existing Wincc profs according to the instructions and started the installation again, but the result is still the same. I would like your help regarding the solution. Hello Attachmentv15_1 kurulum hatası.docx (241 Downloads) |
Last edited by: otomasyoncu34 at: 01/21/2024 14:49:34 |
|
| 1/21/2024 2:46 PM | |
Joined: 12/18/2014 Last visit: 12/29/2025 Posts: 36382 Rating:
|
English please ... |
| 1/22/2024 6:41 AM | |
Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating:
|
check which other tia SW is installed. maybe a older or newer TIA WinCC Prof or a WinCC V7.x is installed |
Follow us on