Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

PLC SIM Advance error

Created by: AutoGen_7123966 at: 6/21/2023 11:32 AM (5 Replies)

Rating (2)

Thanks 2

6 Entries

6/21/2023 11:32 AM	Rate (0)
AutoGen_7123966 Posts: 5 Rating: (0)	Dear ALL, I want to connecet PLC S7 1500 woth PLC SIM AdvanceV4.0, but unfortunately I cant able to connet. The Error: Differences between configured and target modules (online) The existing online module "6ES 7 SIM-01500-APLC " is not compatible with the module configured offline 6ES7 512-15K01-OABO. Loading to the target system is not possible. The existing online module "S29.80* is not compatible with the module configured offline "V2.8"- Loading to the target system is not possible. How to reslove this ? Please take a look and kindly help me in this regard. Thanks in Advance:)
AutoGen_7123966 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

6/21/2023 12:05 PM	Rate (0)
alizon Silver Expert Joined: 1/15/2020 Last visit: 10/17/2025 Posts: 154 Rating: (43)	I think you need to select an ET200SP instead of a 1500 PLC in PLCSIM

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_7123966

6/26/2023 12:55 PM	Rate (0)
AutoGen_7123966 Posts: 5 Rating: (0)	Thanks For your responses, unfortunatly its not working:)
AutoGen_7123966 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

1/15/2024 1:13 PM	Rate (0)
AutoGen_5643253 Posts: 1 Rating: (0)	Hi, I have the same error. Could you please let me know how to fix this? Regards Ajay
AutoGen_5643253 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/23/2024 2:19 PM	Rate (0)
uzunbilal Member Joined: 8/28/2015 Last visit: 12/11/2025 Posts: 1 Rating: (0)	If the configured PLC in TIA Portal is 6ES7 512-1SK01-0AB0, you must select "ET 200SP" when creating the instance with PLCSIM Advanced

Suggestion To thank Quote Answer

1/23/2024 3:06 PM	Rate (2)
sancruz Gold Expert Joined: 3/11/2019 Last visit: 12/9/2025 Posts: 1653 Rating: (322)	In addition to that, you have to start a new instance after ET200SP CPU was selected. The drop down menu does not change already existing instances. regards sancruz
	Feedback appreciated, please rate
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_6973614

|

Share this page:

Share this page on...

Follow us on