Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Creating a Loop function based in timer using Function Block

Created by: Camez at: 1/25/2024 5:20 AM (4 Replies)

Rating (1)

Thanks 0

5 Entries

1/25/2024 5:20 AM	Rate (0)
Camez Member Joined: 10/4/2018 Last visit: 9/23/2025 Posts: 17 Rating: (0)	Good day to all of you I need your help, please, i have an agitator and it needs to agitate according to the following routine 8 seconds CW 4 seconds pause 8 seconds CCW 4 seconds pause and this needs to be done 4 times but with different times time 1 : 7 min time 2: 14 min time 3 : 4 min time 4 : 6 min I need to use Ladder programing S71200 1214 AC/DC/RLY i am trying to create a function block but it just doesnt work. i appreciate your comments and again, i appologize if this seems easy to solve, but i am just blind to solve this. Attachment cycle.jpg (294 Downloads)

Suggestion To thank Quote Answer

1/25/2024 1:03 PM	Rate (0)
jacek d Platinum Expert Joined: 9/23/2005 Last visit: 1/9/2026 Posts: 5154 Rating: (772)	Don't be shy. Show off what you've done so far.
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

1/25/2024 1:22 PM	Rate (1)
Piotr.M Platinum Expert Joined: 6/24/2013 Last visit: 11/14/2025 Posts: 1696 Rating: (433)	Hi you will need 2 counters 1. for external sequence (which set of timers) 2. for sequence itself sketch 1. reset counter Main to 0 2. set timers to setup[Main_Counter] 3. perform sequence 4. at the end of sequence increment main counter and exit when done or move to 2. Steps 2,3,4 can be programmed in main sequence

Suggestion To thank Quote Answer

1/25/2024 4:38 PM	Rate (0)
Camez Member Joined: 10/4/2018 Last visit: 9/23/2025 Posts: 17 Rating: (0)	Thaks I will show you when i finish translating, since spanish is my regular language i need to change variable names so that you can get to understand my situation. Thank you

Suggestion To thank Quote Answer

1/25/2024 6:06 PM	Rate (0)
Camez Member Joined: 10/4/2018 Last visit: 9/23/2025 Posts: 17 Rating: (0)	attached you will find my programing code and also in case you dont have this version i have added pdf document printing both main structure and the function agitation thanks for your feedback Attachment PrimusV1Feb23.zip (300 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on