Navigation

Cannot change the assignment "connection with subnet"

Created by: Álvaro Mozón at: 1/31/2024 11:24 AM (1 Replies)

1/31/2024 11:24 AM	Rate (0)
Álvaro Mozón Joined: 7/27/2023 Last visit: 1/28/2025 Posts: 1 Rating: (0)	Hello, I'm trying to connect to a subnet but in my version of TIA Portal (v15.1) I do not have any way to change the assignment "connection with subnet". Could it be a problem with my TIA version or a system administrator configuration?. Thank you. ------------------------------------------------------------------------------------------ Split from TIA Portal access to PLC on different subnet IP. Attachment subnet connection TIA Portal.jpg (277 Downloads)
	Last edited by: Jen_Moderator at: 02/01/2024 09:13:24 New subject after splitting Last edited by: AutoGen_1770895 at: 02/01/2024 11:10:47
Suggestion To thank Quote Answer

2/1/2024 4:23 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 12/23/2025 Posts: 16325 Rating: (2520)	Prerequisites to performing subnet assignment: PLC and network subnet and network device are created. PLC (for profinet) assigned as PN Master Portal Project is OFFLINE Steps I use: Open Network and Devices tab in the working pane For a PN device, click and drag from PN port of network device to PN Master network port (PLC). Subnet assignment is complete. PB is similar. AutoGen_1770895 Hello, I'm trying to connect to a subnet but in my version of TIA Portal (v15.1) I do not have any way to change the assignment "connection with subnet". Could it be a problem with my TIA version or a system administrator configuration?. Thank you. ------------------------------------------------------------------------------------------ Split from TIA Portal access to PLC on different subnet IP.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Álvaro Mozón