Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Is possible to revert back to PLCSIM V17 and use it in combination with TIA Portal V18?

Created by: Patrick1965 at: 11/11/2023 8:44 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

11/11/2023 8:44 PM	Rate (0)
Patrick1965 Member Joined: 9/24/2022 Last visit: 11/1/2025 Posts: 1 Rating: (0)	I do agree. Would it be possible to revert back to PLCSIM V17 and use it in combination with TIA Portal V18? The interface of PLCSIM V18 is not user friendly at all and also sequences no longer seem to be supported BartoszPawlowski its so bad, same here ! ------------------------------------------------------------------------------------------ Split from PLCSIM V18 is BAD.
	Last edited by: Jen_Moderator at: 11/13/2023 10:58:32 New subject after splitting
Suggestion To thank Quote Answer

11/13/2023 7:22 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 12/17/2025 Posts: 4493 Rating: (644)	Hi, I have heard that with TIA V19 S7-PLCSIM gets an improved user interface. The simulation of sequences is also to be supported. Let's wait and see what happens. Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

2/2/2024 2:32 AM	Rate (0)
khan8109 Posts: 1 Rating: (0)	Yes, it is possible to run Tia portal v18 with STEP7SIM V17. When I first integrated the project and started loading the program to PLC it was showing error and abort loading . The main problem was my hardware selection . When I downgrade the project hardware version for example s7-CPU 1211C DC/DC/DC it is working . I also had to open SIM software separately and create a new project there.
khan8109 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users qwazee

|

Share this page:

Share this page on...

Follow us on