Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Connect Second IPC with WINCC Runtime Client without server

Created by: Khanaamir78624 at: 1/30/2024 12:39 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/30/2024 12:39 PM	Rate (0)
Khanaamir78624 Joined: 1/30/2024 Last visit: 6/28/2025 Posts: 1 Rating: (0)	Hi, I have an existing system with PLC S7-1500 controller connected with I/O Cards and an IPC with WINCC Runtime (interconnected all through profinet/ethernet using an unmanaged switch). I want to add a 2nd PC system with WINCC Runtime so that i can have remote access to the same controller. How can i achieve this without the addition of a server? Thanks
	Last edited by: Khanaamir78624 at: 01/30/2024 12:48:50
Suggestion To thank Quote Answer

1/31/2024 11:52 AM	Rate (0)
Sundance00 Advanced Member Joined: 12/23/2021 Last visit: 2/21/2024 Posts: 234 Rating: (24)	Hi! Are you using WinCC Advanced or Professional? If you are using the lastly, you should implement a Server-Client architecture, as it is explained here: Plant Configuration Using WinCC Runtime Professional
	If this post helped you in any way, please rate it positively. Thank you and best regards.
Suggestion To thank Quote Answer

2/6/2024 9:28 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 9/5/2025 Posts: 16349 Rating: (1932)	Hello Khanaamir78624 Yes without more information we cannot give an exact suggestion. But you can can access the same PLc and DBs with more than one HMI parallel.Check out this FAQ for general information: https://support.industry.siemens.com/cs/ww/en/view/109479986 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on