Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

When starting the simulator an error window appears: Simulation (0626:000001)

Created by: codutiwalter at: 4/12/2021 8:36 PM (6 Replies)

Rating (0)

Thanks 1

7 Entries

4/12/2021 8:36 PM	Rate (0)
codutiwalter Member Joined: 4/7/2020 Last visit: 9/8/2025 Posts: 1 Rating: (0)	Buongiorno ,ho un problema ,quando faccio partire il simulatore compare una finestra di errore : Simulazione (0626:000001) Non è possibile avviare la simulazione perchè è già attivato un collegamento online con un dispositivo Separa i collegamenti online attuali e riavvia la simulazione... Non sono collegato online con nessun dispositivo cosa posso fare per risolvere il problema ? Grazie ------------------------------------------------------------------------------------------ Split from Connection problem TIA PLCSIM Advanced 0132:000002.
	Last edited by: Jen_Moderator at: 04/13/2021 09:22:09 New subject after splitting
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ADONIRAMCR

4/13/2021 9:23 AM	Rate (0)
Jen_Moderator Posts: 8171 Rating: (174)	Hi codutiwalter, welcome to the Technical Forum Please, try to discuss your question in English language. This is an international community and we try to focus on one language. Posting in English will help you to get more response to your question. This is the translation of your question: codutiwalter Good morning, I have a problem, when I start the simulator appears an error window: Simulation (0626:000001) It is not possible to start the simulation because it is already activated an online connection with a device Separate the current online connections and restart the simulation... I am not connected online with any device What can I do to solve the problem? Thanks Best regards, Jen_Moderator
Jen_Moderator Posts: 8171 Rating: (174)
Suggestion To thank Quote Answer

6/16/2021 5:34 AM	Rate (0)
ADONIRAMCR Posts: 1 Rating: (0)	SCUSA IL MIO BUON AMICO, HO LO STESSO PROBLEMA, PUOI AIUTARMI A DIRMI COME RISOLVERE?
ADONIRAMCR Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

11/3/2022 10:07 AM	Rate (0)
ALMOHARG Regular Member Joined: 3/3/2021 Last visit: 3/5/2025 Posts: 21 Rating: (0)	yes. i have same problem the simulator cant started and error window appears: Simulation (0626:000001) please solve it...

Suggestion To thank Quote Answer

11/3/2022 12:43 PM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 12/19/2025 Posts: 3266 Rating: (526)	Hi, did you check the forum, e.g. following topic? PLCSIM doesn't start on V14 SP1 Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

2/8/2024 4:18 PM	Rate (0)
AutoGen_4705447 Posts: 1 Rating: (0)	Simulation (0626:000001) Simulation cannot be started because there is already an online connection to a device How to solve this issue
AutoGen_4705447 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/8/2024 6:04 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 12/23/2025 Posts: 16325 Rating: (2520)	Just guessing, but restart of the PC running the PLC simulator should correct the problem. If TIA Portal is online with a simulator and portal crashes (it's possible!), the connection may not cleanly close, and you get stuck. Or, stop the simulator, and restart the simulator - probably the best solution. What happened before the message below? Was someone else connected to the simulator - from another PC, or from TIA Portal in another Virtual Machine? AutoGen_4705447 Simulation (0626:000001) Simulation cannot be started because there is already an online connection to a device How to solve this issue
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on