Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TIA V16 and Sinamics V90 problem

Created by: 3dautomation at: 12/12/2019 9:00 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

12/12/2019 9:00 PM	Rate (0)
3dautomation Posts: 45 Rating: (1)	Hello friends, I was using the Tia portal v15.1. There were 15 sinamics v90 servos in my project. I uninstalled V15.1 from my computer. And I installed v16.0 on the computer. However, I used HSP in my project. And in the V16.0 version sinamics v90 does not support hsp. Anybody know anything about this? How can I solve it? Will the current HSP files for v16 be released? Or will the V16 not support v90 servo? If you open an empty project already in v16 version you will see that there is no v90 catalog information on the right. I wish you good work.
3dautomation Posts: 45 Rating: (1)
Suggestion To thank Quote Answer

12/13/2019 6:50 AM	Rate (0)
karthik live Experienced Member Joined: 5/11/2010 Last visit: 12/17/2025 Posts: 90 Rating: (8)	Hi Sinamics V90 drive is available in TIA V16 "without hsp". Other field devices >> Profinet io >>Drives>> sinamics AG>>Sinamics

Suggestion To thank Quote Answer

12/14/2019 1:22 PM	Rate (0)
3dautomation Posts: 45 Rating: (1)	But my old project was written in tia portal v15.1. Ve I used hsp access for v90 in the program. Now I can't open the project on tia portal v16. Can you help me?
3dautomation Posts: 45 Rating: (1)
Suggestion To thank Quote Answer

12/31/2019 12:40 PM	Rate (0)
Aslaan Experienced Member Joined: 7/11/2009 Last visit: 9/26/2025 Posts: 55 Rating: (2)	Hi Normally old versions TIA projects could not be opened in a new one. In these cases you have to migrate your project to new version TIA.

Suggestion To thank Quote Answer

1/2/2020 11:17 AM	Rate (0)
Yu-wen Tang Silver Member Joined: 10/7/2009 Last visit: 12/2/2025 Posts: 266 Rating: (96)	Aslaan Hi Normally old versions TIA projects could not be opened in a new one. In these cases you have to migrate your project to new version TIA. You can open a V15.1 project with V16, the upgrade will be automatically launched. Attachment TIA project upgrade.PNG (804 Downloads)

Suggestion To thank Quote Answer

1/8/2020 1:26 PM	Rate (0)
RB91 Gold Member Joined: 4/28/2015 Last visit: 12/19/2025 Posts: 1278 Rating: (302)	Hi, also for TIA V16 the HSP185 for V90PN is available. You need to install it, then I guess you can open your V15.1 project in V16. Check out the HSP for V16 here: https://support.industry.siemens.com/cs/ww/en/view/72341852
	Best regards, Robert
Suggestion To thank Quote Answer

1/8/2020 1:38 PM	Rate (0)
Yu-wen Tang Silver Member Joined: 10/7/2009 Last visit: 12/2/2025 Posts: 266 Rating: (96)	Hi, Refer to this Link also. Best regards, Yu-Wen

Suggestion To thank Quote Answer

2/12/2024 10:46 AM	Rate (0)
chems eddine_seddik Joined: 2/12/2024 Last visit: 3/10/2025 Posts: 2 Rating: (0)	thanks

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on