Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

ap.15 won't open

Created by: sukhoi at: 2/24/2024 7:36 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

2/24/2024 7:36 PM	Rate (0)
sukhoi Posts: 88 Rating: (1)	hello could you tell how to open this file or is it corrupt? https://drive.google.com/file/d/1NhPxsrq0BAMITUIqrtDryynYkj5pJJc1/view?usp=sharing best regards
sukhoi Posts: 88 Rating: (1)
Suggestion To thank Quote Answer

2/25/2024 8:01 AM	Rate (0)
qwazee Platinum Member Joined: 3/30/2020 Last visit: 12/11/2025 Posts: 5656 Rating: (1082)	In your case you have shared an "AP15_1" file. That means it is Step7 V15.1 that you need to open it. Step7 V15 will not work. Also note that the APxx files can not live on their own. These are inside a folder structure. The APxx file is only the entry files for all the files within the other folders. Share the whole folder structure where the AP15_1 file lives if you want someone to have a look. Share it here as a ZIP file.
	Activities of this user is voluntary. There is no obligation or liability placed on this user. Though optional, your 'please' and 'thank you' is highly valued.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users sukhoi

2/26/2024 8:11 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 12/19/2025 Posts: 3266 Rating: (526)	Hello sukhoi, as qwazee already wrote it is ap15_1. To open this project you have to install TIA V15.1 (SIMATIC STEP 7 and WinCC V15.1 TRIAL Download). Regards, Frink
	Last edited by: Prof. Frink at: 02/26/2024 08:13:56 Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on