Access onto the project not possible. Error (0): The operation completed successfully.

Hello

I have an issue with WinCC Professional V17 that I can not solve. WinCC Running fine on my server, however; when I try to connect a client through Simatic Shell I get the Error;

'Access onto the project: \\Project Path\ Not Possible.

Error (0): The operation completed successfully. 

I have deleted the ProjectLock File that was generated. 

Everything has been working fine for months previously but today this issue has occurred.

Any help is greatly apricated. 

Hi JLindsay,

To see what might be happening and why this failure has occurred we would appreciate it if you could share the following information with us:

- First of all I recommend that you go through the following FAQ step by step as it is vital to have it set up correctly: "What are the requirements for the use of SIMATIC WinCC in a Windows network?"

- Screenshot of the operating system (OS) you are working on the client by accessing from the Windows bar command "Winver".

- Screenshot of the error you get.

- Have you made or have there been any changes recently? Any software updates, windows updates or IT changes?

Best regards!

Hi dear

i have exactly the same problem in the client system. Did you manage to solve your problem?

what's the solution?