Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

audit trail: admin logout entry isn't visible

Created by: dhiraj_vasaikar49 at: 7/4/2023 9:21 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

7/4/2023 9:21 AM	Rate (0)
dhiraj_vasaikar49 Joined: 3/21/2023 Last visit: 7/24/2025 Posts: 27 Rating: (0)	im using tia portal v17 rt advance scada i have made some users but i have problem in audit trail when im login with admin and then without logoff admin i login with operator then in audit trail shows admin login and operator login entry only. it doesnt show admin logout entry so what should i do now
	Last edited by: Jen_Moderator at: 07/05/2023 06:55:11 Headline optimized.
Suggestion To thank Quote Answer

7/5/2023 7:07 AM	Rate (0)
Cocolino Silver Member Joined: 4/8/2021 Last visit: 1/7/2026 Posts: 642 Rating: (114)	Hi dhiraj, As far as I know user login and logout is by default stored within the Audit trail logs. What happen if you do logout with the admin user? Is that action stored within the audit trail log? If so,I guess this is the expected behaviour. Br, Cocolino
	Best regards, Cocolino Don't forget to use the Rate Function if you find my answer useful :) THX :)
Suggestion To thank Quote Answer

7/7/2023 11:12 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 1/8/2026 Posts: 16618 Rating: (1944)	Hello dhiraj_vasaikar49 perhaps you have to do this: https://support.industry.siemens.com/cs/de/en/view/109758223 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

3/28/2024 7:51 AM	Rate (0)
priyanshuu Joined: 11/22/2022 Last visit: 12/10/2025 Posts: 1 Rating: (0)	after doing all this procedure the audit of log off of existing user has been come in the audit trail if i dont log off existing user and login with the new user?....because the solution you provide is for alarm window popup not for audit trail. if i'm wrong please correct me.. eagerly wait for your reply

Suggestion To thank Quote Answer

3/28/2024 2:51 PM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 1/8/2026 Posts: 3272 Rating: (526)	Hi priyanshuu, you have to explain to the auditor that only one user can be logged in at a time and logging in one would log off the previous one. This is a system behaviour. I see two possibilities for user change: login button is always visible button where current user has no authorization is visible So I see one solution, if description above is not sufficient: Hide those buttons, e.g. by using visibilty (under section animations). Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Murof

|

Share this page:

Share this page on...

Follow us on