Navigation

PLC SIM Problem

Created by: Shahadat96 at: 4/11/2024 10:10 AM (1 Replies)

4/11/2024 10:10 AM	Rate (0)
Shahadat96 Joined: 3/18/2024 Last visit: 11/10/2025 Posts: 38 Rating: (0)	Hi, I have problem with PLCSIM. I would like to simulate my program but it does not working with PLCSIM when I would press the monitoring on. Can you please help me to get the solution? Attachment PLC SIM.png (246 Downloads)

Suggestion To thank Quote Answer

4/11/2024 11:14 AM	Rate (1)
JBS98 Experienced Member Joined: 7/19/2022 Last visit: 12/23/2025 Posts: 436 Rating: (72)	Hello Shahadat96, The screenshot you attached looks like the PLC is in STOP mode because on the right side the tate of the RUN/STOP LED is orange. You should put it in RUN.
	If this Information really helps, you could use the Rate function Best Regards, JBS98
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Shahadat96 0_Einstein