WinCC Redundancy Download Error

What should you watch out for when downloading WinCC Runtime Professional from the Engineering Station to the Operator Station (Runtime PC)?

What settings do you have to make when installing a multiple station system in SIMATIC WinCC Professional?

Hi itafusna,

Thanks for the reply. When i examine the document , I see a statement as follows ;

You should note the following points for redundant configuration of your system with 2 servers:

• The Engineering Station must be on a separate PC system to be able to upload to servers.
• The two servers must be on separate PC systems.

So We have two PC (Windows 10 Pro) While creating the structure , one is considered as ES and the other as OS.

Is redundant possible in this case ?

Hi Livnloud,

For a redundancy project you have to use a engineering station and to separate server.

Message: Rednadant server cannot be created on a local device

Means that you use one of the server  as engineering station.

Best regards

schufri

Now I have a different problem.

There is no problem installing on the First Server. Runtime opens.I am getting the attached (Err-1.jpg) error while installing on the second server.

When I configure it as a single, the first server opens without any problems. When configure the second server as a single (Computer name, ip address, etc.), it still gives an error (Err-2.jpg) when opening the runtime.

Best regards.

Attach Err-2