Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

configuration IO-device / PLCsim

Created by: azu at: 6/16/2014 1:46 PM (5 Replies)

Rating (0)

Thanks 2

6 Entries

6/16/2014 1:46 PM	Rate (0)
azu Experienced Member Joined: 7/10/2008 Last visit: 11/11/2025 Posts: 32 Rating: (1)	Hallo members. Question: Is it possible to test IO-devices in PLCsim. I have one IO-device (CPU315) connected with two I-Devices (also CPU315). There are two transfer area's for each I-device configurated. When two plcsim environment are running , i cannot see the data in the other CPU. ( TIA V12 SP1 Update 4) ThanX Pietr Attachment IO_device.JPG (417 Downloads)

Suggestion To thank Quote Answer

6/17/2014 10:51 AM	Rate (0)
H_a_m_m_y Experienced Member Joined: 8/19/2013 Last visit: 1/12/2026 Posts: 148 Rating: (11)	Hello azu, i startet a first test - it is not working too ... later i will try it again - sounds interesting Regards !

Suggestion To thank Quote Answer

6/17/2014 4:18 PM	Rate (0)
azu Experienced Member Joined: 7/10/2008 Last visit: 11/11/2025 Posts: 32 Rating: (1)	Thank you H_a_m_m_y for trying:-)

Suggestion To thank Quote Answer

6/30/2014 12:17 PM	Rate (0)
azu Experienced Member Joined: 7/10/2008 Last visit: 11/11/2025 Posts: 32 Rating: (1)	It is not possible to test IO <>I device communication with PLC sim. A siemens guy told me that. My question is answered ThanX

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users H_a_m_m_y JerMah

4/24/2024 1:48 PM	Rate (0)
amine82 Posts: 1 Rating: (0)	Hello Azu, Please your comment is always true using PLCSIM advanced 4.0. Thanks in advance.
amine82 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/24/2024 2:35 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 1/12/2026 Posts: 4847 Rating: (512)	amine82 Hello Azu, Please your comment is always true using PLCSIM advanced 4.0. Thanks in advance. PLCsim Advanced is only for 1500 series PLC's. The 10 year old topic starter had 300 series PLC's, and that means he had to use also the PLCsim classic.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on