Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

S7-1200 Upload Error

Created by: IDICULLA at: 4/30/2024 6:43 AM (8 Replies)

Rating (0)

Thanks 2

9 Entries

4/30/2024 6:43 AM	Rate (0)
IDICULLA Posts: 8 Rating: (0)	Hello, Please help me upload program from my SIMATIC S7-1200 CPU 1215C DC/DC/DC 6ES7 215-1AG40-0XB0 to my pc using TIA Portal V18 to upload the program. The error message is attached below. Attachment Siemens Upload Error.png (252 Downloads)
IDICULLA Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/30/2024 6:52 AM	Rate (0)
Stefan Arcularius Platinum Expert Joined: 1/21/2013 Last visit: 1/13/2026 Posts: 4393 Rating: (652)	Hi IDICULLA, The message states that the program data in your project is already up to date and therefore no further upload will be performed. Kind regards Stefan

Suggestion To thank Quote Answer

4/30/2024 7:24 AM	Rate (0)
IDICULLA Posts: 8 Rating: (0)	Stefan Arcularius Hi IDICULLA, The message states that the program data in your project is already up to date and therefore no further upload will be performed. Kind regards Stefan Hi Stefan, What would be the possible solution for this issue? Sometimes another error message appears which is attached below. Regards, IDICULLA Attachment Siemens Upload Error 2.png (229 Downloads)
IDICULLA Posts: 8 Rating: (0)	Last edited by: IDICULLA at: 04/30/2024 07:32:44
Suggestion To thank Quote Answer

4/30/2024 7:32 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/13/2026 Posts: 22796 Rating: (3073)	IDICULLA Stefan Arcularius Hi IDICULLA, The message states that the program data in your project is already up to date and therefore no further upload will be performed. Kind regards Stefan Hi Stefan, What would be the possible solution for this issue? Sometimes another error message appears which is attached below. Regards, IDICULLA there is no solution because there is no error and please expand the error in the second message!
	Last edited by: ChristophD at: 04/30/2024 07:33:47
Suggestion To thank Quote Answer

4/30/2024 7:34 AM	Rate (0)
IDICULLA Posts: 8 Rating: (0)	Hello, The message is attached below. Attachment Siemens Upload Error 2.png (220 Downloads)
IDICULLA Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/30/2024 7:36 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/13/2026 Posts: 22796 Rating: (3073)	IDICULLA Hello, The message is attached below. EXPAND the message! click on the arrow in front of the error

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Stefan Arcularius

4/30/2024 7:43 AM	Rate (0)
IDICULLA Posts: 8 Rating: (0)	Attachment Siemens Upload Error 2.png (206 Downloads)
IDICULLA Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/30/2024 7:46 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/13/2026 Posts: 22796 Rating: (3073)	this PLC with this FW do not support Upload

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Stefan Arcularius

4/30/2024 7:54 AM	Rate (0)
IDICULLA Posts: 8 Rating: (0)	Hello, Is it possible to upload with older version of TIA portal? Regards, Idiculla
IDICULLA Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on