Navigation

can I migrage TIA V14 project in to V16

Created by: Bhur at: 5/14/2024 2:12 PM (1 Replies)

5/14/2024 2:12 PM	Rate (0)
Bhur Member Joined: 2/12/2017 Last visit: 7/30/2025 Posts: 6 Rating: (0)	I have a project open in TIAV16 utilising the Simatic HMI KTP400 comfort module, but I am unable to open it because of a licence issue. First of all, the only information I have is that the version number of 14.0.1.0 is displayed under the software or Firmware version of the HMI. I am not sure exactly which version of TIA was used to develop this HMI. Will this project allow me to update or reconfigure if I purchase Wincc Comfort V16? Every assistance solicited in advance

Suggestion To thank Quote Answer

5/15/2024 9:21 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hello, You will need the software WinCC Comfort v16. Here you can download a TRIAL version: SIMATIC STEP 7 incl. Safety and WinCC V16 TRIAL Download You can test it for 21 days. When you want to use it longer, you will have to buy a license WinCC Comfort. Best regards, Wizard

Suggestion To thank Quote Answer