Convert Logo program to TIA program

spavic7

is there possibility to modify this program?
I have 3 pumps, which needs to change every 10 hours but they also work depending on pressure.

example: pump1 is ON when pressure is -0.5bar and it stops when pressure is -0.6bar

If pump 1 can not reach pressure of -0.6, then pump 2 starts at -0.4 bar and they both switch OFF at -0.6.

If pressure is rising, then pump 3 needs to start at -0.2 bar and all three stops at -0.6 bars.

And as I already mentioned, they need to change over every 10 hours, so first 10 hours pump 1 is MASTER then next 10 hours pump 2 and so on.

this is program so far what I did

------------------------------------------------------------------------------------------
Split from change order of lead pump.

Attachment

sewage 2023.zip(339 Downloads)

can u please share the logic in tia portal

------------------------------------------------------------------------------------------
Split from 3 pumps, which needs to change every 10 hours.