Navigation

Comfort PCS7 interface possibilty

Created by: Beans799 at: 5/14/2024 1:56 AM (1 Replies)

5/14/2024 1:56 AM	Rate (0)
Beans799 Advanced Member Joined: 11/28/2018 Last visit: 10/22/2025 Posts: 26 Rating: (0)	Hello, I'm wondering if it's possible to have a PCS7-like interface for my Comfort 15-inch HMI, similar to the faceplates and navigation pane features. My HMI is paired with a 1500 series PLC, and the application is for a water treatment plant. Thank you in advance for your helpful responses!
	Beans
Suggestion To thank Quote Answer

5/23/2024 11:16 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 1/9/2026 Posts: 16629 Rating: (1944)	Hello Beans799 PCS7 uses WinCC V7/8. For Comfort Panels there is not Advanced Process Control available. Perhaps you find some unseful information here: https://support.industry.siemens.com/cs/ww/en/view/50708061 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer