Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TIA Portal v13 and S7 Graph printout without details

Created by: LaraCroft at: 2/24/2015 4:27 PM (8 Replies)

Rating (1)

Thanks 1

9 Entries

2/24/2015 4:27 PM	Rate (0)
LaraCroft Posts: 60 Rating: (2)	Hi Normal 0 false false false EN-CA X-NONE X-NONE TIA Portal v13 and S7 Graph I have made a S7-Graph sequence, and I have difficulty to print the sequence with all steps actions and all transitions details with it. I have only the sequence printout without details. In Print Properties, I have selected “All” but no success. I am using Portal Professional V13 SP1 LaraCroft
LaraCroft Posts: 60 Rating: (2)
Suggestion To thank Quote Answer

2/19/2016 2:54 PM	Rate (0)
U_ea26788d-d3c4-4... Posts: 1 Rating: (0)	Hello LaraCroft, i have the same Problem, but it seems like there is no answer anywhere... Did you ever manage to solve the problem? Thanks in advance
U_ea26788d-d3c4-4... Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/12/2016 5:06 PM	Rate (0)
lantunes Posts: 3 Rating: (0)	Hello, i have the same Problem... I want to print all the details! Have someone solve the problem? Regards
lantunes Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

7/31/2017 3:27 PM	Rate (0)
PCMario Regular Member Joined: 9/1/2009 Last visit: 10/23/2025 Posts: 8 Rating: (1)	Is there already a solution? Thanks, Mario.

Suggestion To thank Quote Answer

12/12/2017 2:09 PM	Rate (0)
jodb Posts: 2 Rating: (0)	I have the same problem. Has anyone resolved this issue yet? Regards Jesse
jodb Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

6/2/2019 11:00 PM	Rate (0)
Gybkabob Member Joined: 5/13/2017 Last visit: 8/3/2025 Posts: 10 Rating: (0)	Same problem

Suggestion To thank Quote Answer

6/3/2019 5:31 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 1/14/2026 Posts: 16365 Rating: (2522)	Have you considered trying the following: create a document template for printing project items, and make the page size as large as possible, perhaps even customized 100m x 100m. Now, when it comes time to print, you print ON whatever paper size you want and have the printer driver convert the large paper size into smaller pieces - or use a scaling factor when printing on smaller size so it fits on the paper. Does this help? Create a simple graph block, and just print the one block to see. Gybkabob Same problem
	science guy
Suggestion To thank Quote Answer

11/6/2020 5:45 AM	Rate (0)
Jan Ruzicka Member Joined: 4/28/2015 Last visit: 12/20/2024 Posts: 5 Rating: (0)	Your suggestion does'nt work, tried with PDF creator. It gives the same results like with normal A4 paper size.

Suggestion To thank Quote Answer

6/14/2024 10:52 AM	Rate (1)
yussuf_rahman Posts: 1 Rating: (1)	In the project browser, do a right click on the s7 graph block and click on preview print the Steps and the Transitions are available on the preview see print-screen in attach
yussuf_rahman Posts: 1 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Brebiou88

|

Share this page:

Share this page on...

Follow us on