Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Replace an old CPU 414

Created by: vadrian at: 6/23/2009 4:49 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/23/2009 4:49 PM	Rate (0)
vadrian Posts: 20 Rating: (0)	My CPU 414-2XG02-0AB0 is broken and I want to repalce with 414_2XK05-0AB0 but : when I make right click on the CPU in hardware configuration and press "replace object" i can't see my new CPU (414-2XK05_0AB0) I am using S7 V5.4.0.0 Could someone help me? thank you
vadrian Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

6/23/2009 5:03 PM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	vadrian My CPU 414-2XG02-0AB0 is broken and I want to repalce with 414_2XK05-0AB0 but : when I make right click on the CPU in hardware configuration and press "replace object" i can't see my new CPU (414-2XK05_0AB0) I am using S7 V5.4.0.0 Could someone help me? thank you Hello, Update your version of Step7 to SP5. Then make hardware update of hardware catalog and then shoud find this CPU. Helpful links: Service Pack 5 for STEP 7 V5.4 and STEP 7 Professional Edition 2006 How can you update the hardware catalog without direct Internet access? or How do I update the STEP 7 module catalog in STEP7 Hope his will helps. Best regards Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on