Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

HMI v12 pre release version file which want to upgrade to v13 or above

Created by: Ramkumar_1976 at: 5/16/2019 1:28 PM (9 Replies)

Rating (0)

Thanks 1

10 Entries

5/16/2019 1:28 PM	Rate (0)
Ramkumar_1976 Regular Member Joined: 12/23/2014 Last visit: 12/22/2025 Posts: 6 Rating: (0)	Hi, Find the attached screenshot error in V13 SP1 for HMI v12 pre release version file which i want to upgrade to v13 or above ., but the without v12 prerelease i could not do the same , Pl. help me to upgrade . Thanks for the support ------------------------------------------------------------------------------------------ Split from upgrade project tia portal V12 -> V13. Attachment tiav12 error.PNG (387 Downloads)
	Last edited by: Jen_Moderator at: 05/16/2019 14:37:50 New subject after splitting
Suggestion To thank Quote Answer

5/27/2019 3:10 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 12/19/2025 Posts: 16612 Rating: (1943)	Hello - Which Version has the System with which the Project was opened the last time? - Which TIA Portal Version do you have installed wxactyl on your System now and which Packages (Step7 Basic/Prof; WinCC Basic/Comfort/Advanced/Prof.)? Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

6/12/2019 11:00 AM	Rate (0)
Ramkumar_1976 Regular Member Joined: 12/23/2014 Last visit: 12/22/2025 Posts: 6 Rating: (0)	Hi, It was opened successfully on comfort.,as per the supplier statment

Suggestion To thank Quote Answer

6/12/2019 11:10 AM	Rate (0)
Ramkumar_1976 Regular Member Joined: 12/23/2014 Last visit: 12/22/2025 Posts: 6 Rating: (0)	I have try to use TIA v13 SP1 comfort/advance and error showing

Suggestion To thank Quote Answer

6/13/2019 6:13 AM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 12/26/2025 Posts: 4829 Rating: (512)	Ramkumar_1976 I have try to use TIA v13 SP1 comfort/advance and error showing What error do you get with this version of TIA?

Suggestion To thank Quote Answer

6/13/2019 6:38 AM	Rate (0)
Ramkumar_1976 Regular Member Joined: 12/23/2014 Last visit: 12/22/2025 Posts: 6 Rating: (0)	Hi Find the screenshot Attachment tiav12 error.PNG (345 Downloads)

Suggestion To thank Quote Answer

6/13/2019 6:44 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating: (3073)	hi, the project was created with a pilot version of tia portal. projects which created with such a version can not be opened / used with the released versions. please contact supplier that you get a project which is made with a released version. regards christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ramkumar_1976

6/13/2019 6:46 AM	Rate (0)
Ramkumar_1976 Regular Member Joined: 12/23/2014 Last visit: 12/22/2025 Posts: 6 Rating: (0)	Thank you Christopher

Suggestion To thank Quote Answer

6/22/2024 2:12 AM	Rate (0)
joshichandra.csj Regular Member Joined: 3/14/2019 Last visit: 11/26/2025 Posts: 2 Rating: (0)	Hi, Can you please guide how you open this prerelease hmi backup, I am facing same problem and unable to open HMI backup. Can you help me for this issue. Thanks Chandra Shekhar Joshi

Suggestion To thank Quote Answer

6/22/2024 4:28 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating: (3073)	see post above in the thread

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on