Snapshoot from actual value (project three)

When I click on the "snapshoot from actual value" on the project three and than open up the datablock the snapshoot column dont exsist? If I press "snapshoot from actual value" in side a datablock the snapshoot it taken and a new column called snapshoot is added... ?

From doucment you shall be able to take snapshoot of all datablocks at ones by cliking right on the project three and choice "snapshoot from actual value" ?

What is I`m missing here ?

Thank you all :)

Hi AutoGen_7073121,

To create a snapshot you must have an online connection to the CPU and the offline and online data block must be identical. Link for creating a snapshot: https://support.industry.siemens.com/cs/ww/en/view/109815056/123045319691

Best regards!

When you take snapshots on the project tree (right clicking on the processor) the column "snapshot" won't be created as when you open a DB and take the snapshot, despite that, the snapshot is created.

One way to check is to take the snapshot from the project tree and open any DB (the compile tab will show you the actual DBs that that took snapshots) and look for the "snapshot created" timestamp. If you use the copy snapshots to start values button, it will work even if you don't see the new column created.