Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

HMI TP 1200 comfort inox

Created by: jsabatie at: 6/20/2024 8:55 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/20/2024 8:55 PM	Rate (0)
jsabatie Joined: 10/30/2022 Last visit: 11/12/2025 Posts: 1 Rating: (0)	I created a project with TiaPortal V18 that combines a panel TP 1200 comfort inox (V16.0) and a CPU 1215C AC/DC/Rly My first problem is that the panel (ref 6AV2144-8MC10-0AC0) is not in the TIA portal catalog. How is it possible to solve that ? Also, I downloaded a 1200 comfort panel image in the panel using the Prosave software and when I try to dowload a program in the panel through ethernet conncetion I have the three errors that appears in the attached image. Your help is welcome. Attachment errors.jpg (334 Downloads)

Suggestion To thank Quote Answer

6/21/2024 9:21 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating: (3073)	use the normal tp1200 in tia

Suggestion To thank Quote Answer

6/21/2024 2:38 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hello, The error mentioned no image file installed. Here a link to download and install image files: Image Downloads for SIMATIC HMI Operator Panels: Comfort / Mobile / Basic Panels Best regards, Wizard

Suggestion To thank Quote Answer

6/27/2024 8:12 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 12/19/2025 Posts: 16612 Rating: (1943)	Hello jsabatie Yes use the HMI_PIU_Installer from the posted link and install all Images for TIA V18. This will include also the newest available V17 Image for the Comfort Panel (there are no newer ones available) Check also in your project what is set as HMI Image Version -> you should use the latest one V17 Then the transfer should work bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on