Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

No corresponding network found

Created by: Automacao.rumo at: 3/13/2020 5:42 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

3/13/2020 5:42 PM	Rate (0)
Automacao.rumo Posts: 1 Rating: (0)	Hi, We need make a update on program the PLC, when i opened my last backup, it's show a diference betewen a backup and program on-line. looks like the network was deslocade, and shows this masenge "no corresponding network found". But ist same program. How i should resolve this problem Attachment offline-online.PNG (696 Downloads)
Automacao.rumo Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/6/2022 10:24 AM	Rate (0)
edwardalpro Posts: 4 Rating: (0)	I think i have the same issue. network 45-50 of the offline project is shown as having no corresponding network. below that, the same is happening but for the online networks. manual comparisson shows the networks to be identical.
edwardalpro Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

7/6/2022 4:48 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 1/14/2026 Posts: 16365 Rating: (2522)	Are you using S7-300/400 PLC? If so, after manual comparison, if you want to download to the PLC, please do (at your own risk) as you know they are identical. What is the real problem you are trying to solve? edwardalpro I think i have the same issue. network 45-50 of the offline project is shown as having no corresponding network. below that, the same is happening but for the online networks. manual comparisson shows the networks to be identical.
	science guy
Suggestion To thank Quote Answer

3/17/2024 1:51 AM	Rate (0)
Sulthan Hamdan Joined: 12/10/2023 Last visit: 12/24/2025 Posts: 2 Rating: (0)	So whait is couses happend sir ? and how fix it for the next time

Suggestion To thank Quote Answer

3/17/2024 1:53 AM	Rate (0)
Sulthan Hamdan Joined: 12/10/2023 Last visit: 12/24/2025 Posts: 2 Rating: (0)	0_Einstein Are you using S7-300/400 PLC? If so, after manual comparison, if you want to download to the PLC, please do (at your own risk) as you know they are identical. What is the real problem you are trying to solve? edwardalpro I think i have the same issue. network 45-50 of the offline project is shown as having no corresponding network. below that, the same is happening but for the online networks. manual comparisson shows the networks to be identical. so what's the cause? and how fix it so that not happen for the next time ?

Suggestion To thank Quote Answer

7/15/2024 7:30 AM	Rate (0)
Imiikkael Joined: 4/29/2024 Last visit: 11/14/2025 Posts: 4 Rating: (0)	I have same problem, any update?

Suggestion To thank Quote Answer

7/15/2024 7:56 AM	Rate (0)
Stefan Arcularius Platinum Expert Joined: 1/21/2013 Last visit: 1/14/2026 Posts: 4397 Rating: (652)	Hi, As mentioned in the manual, networks with a difference of more than 50% are not considered to belong together. This means that you have to reduce the differences to make the networks fit together. The 50% difference limit is easily exceeded, especially with small networks . Kind regards Stefan

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on