Logo 0BA1 programming

Hello everybody, i am completely new to this, i have Logos soft comfort program 8.4 version and Logo PLC 0BA1. I am trying to program it. I have additional analog input modules AM2.

I need next program: i will have 6 analog inputs (4-20 mA) signals and i need to program PLC in that way that if any of 6 4-20 mA signals drop below 3.5 mA it will triger PLC to change state of one output contact ( digital output). So basicaly if all signals are ok, i mean in range 4-20mA nothing will happen. If any of them drop below 3.5 mA i need to use one output contact of PLC. Is that possible with PLC which i have? 

I need first to program it in Logo soft comfort but olease note that i am new to all this and i will be very grateful for any help or tips. 

Thanks!

Thank you.

You are correct, i have 6ED1052-1FB08-0BA1, it is marked Logo BM230RCE, 220 VAC power supply.

I have also 6ED1052-1CC08-0BA1 marked Logo 24CE, 24VDC power supply.

I have plenty input modules AM2 marked 6ED1055-1MA00-0BA2.

I have one Logo AM2 AQ expansion output module marked 6ED1055-1MM00-0BA2.

 Is it possible to do it with above listed hardware?

Thank you in advance for your help.

Thank you very much, i will check it and try it. 

You are the best :)