Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

error code : 0xC000AF0700008006

Created by: strong_1986 at: 10/31/2022 2:21 PM (9 Replies)

Rating (2)

Thanks 4

10 Entries

10/31/2022 2:21 PM	Rate (0)
strong_1986 Member Joined: 7/19/2019 Last visit: 4/28/2025 Posts: 1 Rating: (0)	When monitoring S7-1200 PLC program, TIA Portal report : Internal system error ( error code : 0xC000AF0700008006) -Please contact SIMATIC customer support. The request contains an unexpected token. What is to be done about this problem? Attachment webwxgetmsgimg.png (790 Downloads)

Suggestion To thank Quote Answer

10/31/2022 2:25 PM	Rate (1)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 1/15/2026 Posts: 4496 Rating: (644)	Hi, check if you use newest Firmware and TIA Updates. Otherwise reset PLC to factory settings and try again. ...or contact Technical Support for SIMATIC. Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users sancruz Red_7

5/24/2023 5:50 AM	Rate (0)
Abdlkadirkurt Posts: 2 Rating: (0)	Did you solve the attached error? Can you help with the error?
Abdlkadirkurt Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

5/24/2023 9:17 AM	Rate (0)
8Noodles Posts: 1086 Rating: (53)	Hello, did you try out the suggestion from Towome/ the post above yours? If yes, what result did you get? Please tell us more about your issue with detailed information.
8Noodles Posts: 1086 Rating: (53)
Suggestion To thank Quote Answer

5/24/2023 10:06 AM	Rate (0)
Abdlkadirkurt Posts: 2 Rating: (0)	Hello, We did what was recommended above, but the result did not change. It still gives an error.
Abdlkadirkurt Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/17/2023 9:01 AM	Rate (0)
DM85 Regular Member Joined: 4/6/2012 Last visit: 11/7/2025 Posts: 5 Rating: (0)	Hi all, I mine case, I have integrated one vendor project with S1200, to mine one with Tia Portal 16.0 with S1515 PLC. Time to time I got this message. I also did factory reset of the S1200. I am also using Multiuser Server. When I got the message, I can not monitor anything. So I do some change download, made Check In of mine Local session to Server, refresh after that, and then I can do again monitoring... At the moment I haven't found the solution. Probably I will contact support. ( Is this a bug or a future :) hahaha )

Suggestion To thank Quote Answer

9/29/2023 1:12 PM	Rate (1)
fahribassoy Regular Member Joined: 7/28/2021 Last visit: 4/19/2025 Posts: 1 Rating: (1)	This is a problem with TIA. It was fixed when I turned off the computer and turned it on again.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Willparky

12/6/2023 4:42 PM	Rate (0)
Etienne_Choletcab Member Joined: 12/17/2015 Last visit: 1/9/2026 Posts: 1 Rating: (0)	Hello, I've got the same problem. Simply turn off and on TIA portal. Regards
	Last edited by: Etienne_Choletcab at: 12/06/2023 16:43:48
Suggestion To thank Quote Answer

1/14/2024 9:18 AM	Rate (0)
Moose818959 Posts: 1 Rating: (0)	Hi All, I was having this issue on 2 of my PLC's in one project. Its an internal fault within TIA portal and i resolved it by Archiving the project, closing TIA down and then opening back up with the archived project. This sorted out both PLC's and got rid of the issue. Let me know if this has worked for you guys.
Moose818959 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

8/21/2024 10:45 AM	Rate (0)
Willparky Member Joined: 12/15/2017 Last visit: 1/5/2026 Posts: 3 Rating: (0)	fahribassoy This is a problem with TIA. It was fixed when I turned off the computer and turned it on again. I had the same issue. This solution worked for me.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on