Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Importing Discrete Alarms with TIA Openness

Created by: Sukram2 at: 9/6/2024 5:58 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/6/2024 5:58 AM	Rate (0)
Sukram2 Posts: 6 Rating: (0)	Good morning! I would like to add HMI, Discrete Alarams with OpennessAPI, (picture) I didn't find a way in the Documentation, and the XML TextListImport (that works for pretty much everything). doesn't seem to allow for discrete Alarams. Currently I have the file in the xlsx format that is generated if one exports it (GUI, picture). Changing it to the typical import XML format wouldn't be a problem though. Attachment TIADiscreteAlarms.jpg (385 Downloads)
Sukram2 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

9/6/2024 2:50 PM	Rate (0)
Sukram2 Posts: 6 Rating: (0)	I found out, since we use "Comfort/Advanced" Screens, not "Unified" Screens, this is not possible.
Sukram2 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

9/6/2024 2:57 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 1/12/2026 Posts: 16358 Rating: (2522)	I know nothing about your specific problem. However, if you convert your current HMI project over to Unified, does it become possible? Is the resulting exported information allow importing back into your original Comfort/Advanced HMI? Sukram2 I found out, since we use "Comfort/Advanced" Screens, not "Unified" Screens, this is not possible.
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA Openness

Follow us on