Navigation

Faceplate's content is not displayed when the pop-up is called

Created by: jhonut at: 9/13/2024 6:22 AM (1 Replies)

9/13/2024 6:22 AM	Rate (0)
jhonut Posts: 61 Rating: (0)	Hi, I have a TP1200 comfort panel programmed in TIA18. I have created a pop-up screen which contains a faceplate (motor that I created. On the main screen I have a button which, when it's pressed, opens the pop-up. My problem is that faceplate's content is not displayed when the pop-up is called. The way I call the popup is: What I get is: The red X button is added on pop-up screen, not on faceplate. If, I drag and drop the faceplate on a screen or pop-up , it is displayed correctly. What should I do to get faceplate's content when pop-up screen is called?
jhonut Posts: 61 Rating: (0)
Suggestion To thank Quote Answer

9/13/2024 8:12 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 12/19/2025 Posts: 16612 Rating: (1943)	Hello jhonut Try to delete the IM Folder and generate new and do the test again: https://support.industry.siemens.com/cs/de/en/view/109778709 Check also if you have a visibility animation on one or more elements in the Faceplate Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer