Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Please help "fit object to contents" I have a question about fit object to contents.

Created by: worker_ at: 8/27/2024 5:32 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/27/2024 5:32 AM	Rate (0)
worker_ Joined: 5/21/2024 Last visit: 4/23/2025 Posts: 1 Rating: (0)	Hi dear. If you select fit object to contents, the letters will be cut off when running the simulator. What should I do to ensure that the text is printed correctly without being cut off? I am attaching a photo. first photo first sentence Select fit object to contents O. second photo second sentence fit object to contents Select X. Third photo Run the simulator Software installation information. Thank you for reading. Attachment 111.png (245 Downloads)
	Last edited by: Moderator_Lan at: 08/27/2024 10:51:18 Text formatting optimized
Suggestion To thank Quote Answer

8/27/2024 10:58 AM	Rate (0)
JimHalpert Joined: 7/11/2024 Last visit: 12/30/2025 Posts: 200 Rating: (27)	Hello! Which version of TIA Portal are you using? I've seen that some versions had a bug related to this.
	If this post has been useful, don't forget to rate it!😊
Suggestion To thank Quote Answer

9/13/2024 12:06 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 12/19/2025 Posts: 16612 Rating: (1943)	Hello worker_ Install the latest Update for your TIA V15.1: https://support.industry.siemens.com/cs/de/en/view/109763890 Use also the latest available Image version if you use a Panel or the latest Upd for Advanced RT if you use a PC RT Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on