Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

flow meter frequency reading and converting it to L/min s7 314c2pn/dp

Created by: Aloulou123 at: 9/23/2024 2:53 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

9/23/2024 2:53 PM	Rate (0)
Aloulou123 Posts: 2 Rating: (0)	hello guys i hope you had a good day i faced this problem where i have a flow meter fs300A that i connected it to a plc s7 314c 2pn/dp the flow meter sensor is a hall effect sensor that sends impulsions with the rotation of the rotor inside of it cause of the water flow i had this confusion now on what i should do to read the frequency from the sensor and convert it to L/min im a beginner and still learning
Aloulou123 Posts: 2 Rating: (0)
Suggestion To thank

9/23/2024 7:21 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 1/18/2026 Posts: 4853 Rating: (512)	Don't post the same question twice.

Suggestion To thank
This contribution was helpful to 1 thankful Users ixo65

9/24/2024 7:42 AM	Rate (0)
Moderator_Lan Moderator Joined: 7/30/2024 Last visit: 1/19/2026 Posts: 1191 Rating: (20)	Closed because posted twice. The active topic can be found here: flow meter frequency reading and converting it to L/min s7 314c2pn/dp Kind regards, Moderator_Lan

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on