Displaying an array of bool as alarms in WinCC

Hi everyone, I have a project in tia portal V16 upd 7 in which I made my own libraries and also the one about the alarms of the plant. This time I have to use also the Simatic HMI with WinCC comfort panel. I never used it before and I am struggling with the alarms. All my PLC alarms are an Array of  [0..31] bool, as you can see below on the picture

I tried to use the array structure in the HMI tags but it keeps getting an error because it says the data is not accepted in that pos ( Trigger tag ) - I created PlantAlarmTag and everything seems fine, instead of UInt I selected array of bool and with the same size of the used in the plc and then I connected the plc tag to it - but once I put it on the actual trigger tag it won't allow me to do it

On the HMI tags I created a tag in array of [] bool assigned to the pldata.Alarm and everything seems good but when I try to use them in the discrete alarm page I can't. You can see here below my tags of the HMI  

Could you please help me out here ? Thanks

Hi Murof, 

Thanks for your help. I'd like to try with the Gather instruction but I don't understand how it works.

Could you please help me with it ? 

I was trying to insert the array of bool and convert it to an array of DWord. But the TIA portal is not liking it 

Thanks