Creating HMI button with different values in array position

Good morning,

I've currently a bit of a problem. I'm working on an HMI and have to create "some" buttons with different process values, but just increasing in array position.

The "problem" is, each button has 2 positions where I would have to change the value, this is pretty cumbersome while working with more than 100 needed positions in the array.

My question, is there any easier way to do this? Sort of like creating a template of the 4 buttons, add the referencing array and add that template to a picture while I only have to add the number of the position it will be referencing in the array?

I've attached a picture, there its referencing DB_Lim_HH[0] I would need the same button but with DB_Lim_HH[0]...DB_Lim_HH[99].

Thanks

Hello renste,

Perhaps what you are looking for is to do a multiplexing as the following video does:WinCC Unified V16: multiplex array of UDT with index tag

In such a way that based on an index it accesses a position in an array.