Camera View

Hello rdoliveira,

which literature are you reading? (Link/Chapter/Page?)

In the manual (https://support.industry.siemens.com/cs/ww/en/view/109096785/67808903819) it says

Enter the static camera URL in the "Camera URL" field, for example, "rtsp://user:password@192.168.56.208" for a Siemens camera.

The address of the network camera is available in the network camera manual.

So the address is only an example for a specific camera and you need to check the manual of your camera for the correct address.

 Also http doesn't seem to work:

The camera URL always starts with "rtsp://" and must only include permitted characters. If you enter characters that are not permitted or if the URL does not start with "rtsp://", the camera cannot be operated in runtime. The operator will receive an error message in the "Camera view" to indicate the problem.

Alternatively, here is an entry about

• "Monitoring with Network Cameras and SIMATIC HMI Comfort Panels"
  https://support.industry.siemens.com/cs/ww/en/view/65647473

H.J.

Hello rdoliveira,

which literature are you reading? (Link/Chapter/Page?)

In the manual (https://support.industry.siemens.com/cs/ww/en/view/109096785/67808903819) it says

Enter the static camera URL in the "Camera URL" field, for example, "rtsp://user:password@192.168.56.208" for a Siemens camera.

The address of the network camera is available in the network camera manual.

So the address is only an example for a specific camera and you need to check the manual of your camera for the correct address.

 Also http doesn't seem to work:

The camera URL always starts with "rtsp://" and must only include permitted characters. If you enter characters that are not permitted or if the URL does not start with "rtsp://", the camera cannot be operated in runtime. The operator will receive an error message in the "Camera view" to indicate the problem.

Alternatively, here is an entry about

• "Monitoring with Network Cameras and SIMATIC HMI Comfort Panels"
  https://support.industry.siemens.com/cs/ww/en/view/65647473

 Yes in the manual, My camera is not siemens, this can be.